Hot Foil Printing Machine, Hot Foil Blocking, Hot Foil Stamping Machine.

Watch Ribbon
Printer Video
Here!

The Market

The Baby DUT
Hot Foil Printing Machine at just £399.00+VAT
Delivered Free of charge to mainland UK

- Probably the lowest priced machine on the market!

The Baby DUT is a compact table-top hot foil printing machine with an automatic foil rewind system.

The Baby DUT is a great machine for a beginner or for someone who has limited budget/usage. It is a light duty machine, with a small print area and it is capable of printing onto a wide range of products and surfaces including paper, card, leather, PVC, plastic etc. This makes it great for printing onto business cards, stationery, photo mounts, promotional products as well as greeting cards and lots more.

The Baby DUT is a vertical type of hot foil press which is great for printing onto books, diaries , Favour Boxes, Place Cards, Small Invites, Pencils, Napkins, Bookmatches, Gift Paper Bags etc.

Foiling with Blocks

The Baby DUT uses metal dies which can be made from your black and white artwork. We will give you details of companies who make these (based in UK) and they take about 3-4 days to delivery them to you in a jiffy bag. The cost, for a business card size plate/block is between £9.00+VAT for a thin metal plate to about £15.00+VAT for a thick quarter inch plate. The latter will last longer and not bend so easily.

The die is attached to the machine using a special tape and the heated to the correct temperature. Foil colour of your choice is fed into the machine. When you pull the handle, the hot block presses onto your card, paper, plastic, PVC or leather product and this is what creates the print.

When you get a block made, you can incorporate any font, clipart or design.

Click image to enlarge

Foiling with Type

We also offer an optional Type Holder with the Baby DUT at a cost of £29.99+VAT when purchased at the same time as the Baby DUT or £39.99+VAT if purchased at a later date.

Type holder is simple device which is designed to hold lines of type (within slip cases). We recommend that it is suitable only for two to three lines of type, not exceeding the width of the type holder. Slip Cases, Type, Quads & Spacers are all optional extras which can be purchased from our recommended suppliers - we do not supply them ourselves.

The Baby DUT is designed mainly to print onto soft substrates such as leather key fobs, coasters, bookmarks etc. It may also be suitable for other substrates and surfaces but with limitations.

The optional type holder is designed to be affixed onto the die holder (supplied) using two screws. In cases where the type holder is purchased at a later date, we will require the die holder to be sent back to us so that we can drill and tap two holes which will enable the type holder to be securely held onto the die holder.

When using the type holder with type, you will need to remove the sliding print bed and use a suitable base (not supplied). The suitable base could be anything as simple as a piece of MDF etc. This is because the height of the type will narrow the gap between the face of the type and the print bed.

Click image to enlarge

Foiling with Toner Pad

Did you know that with the Baby DUT hot foil printing machine, you can also add foils to photo or laser copies (These foils are different compared to standard for hot foil printing but they do give the same effect).

Currently, we are supplying a free toner sublimation pad which will enable you to add foil effects to your photo or laser copies (see image below).   This process makes it very ideal for foiling headers of greeting cards etc without using any printing plates or blocks. So, whether it's text or logos and images, you can now foil them without using any plates/blocks!

However, please note, the print area on the Baby DUT is only 60 x 90mm so it is not suitable for larger areas. For printing onto large areas, please look at our DUT-21 DIGITAL Hot Foil Printing machine.

Click image to enlarge

Photocopies foiled with
The Baby DUT

The toner pad is not intended to replace blocks but is useful in instances where your require short run foiling onto paper and card only which may not warrant the cost of the block.

The Baby DUT hot foil printing machine represents true value-for-money. In the 22+ years that I have been in the hot foil printing business, I have never come across a hot foil machine that is so versatile and so competitively priced. The Baby DUT hot foil stamping machine is priced to sell!

The Cost

The Baby DUT costs just £399.00+VAT. The Baby DUT is also supplied with the following as standard:-

* Tool Kit
* Die/Plate Holder (60mm x 90mm)
* Instruction Manual
* 12 Warranty back to base

PLUS FREE STARTER KIT:-

* Free Delivery to mainland UK (Worth £15.00+VAT)
* 1 x Roll of Metallic Gold Foil for hot foil printing*
* 1 x Roll of Metallic Silver Foil fir hot foil printing*
* 1 x Die Bonding Tape (To stick dies to die holder)
* 1 x Toner/Sublimation Pad worth £15.00+VAT
* 1 x Pressphan (Backing substrate)
* 6 x Bonded Leather Key Fobs
* 6 x Bonded Leather Bookmarks

Optional

Type holder £29.99+VAT when purchased with the Baby DUT or £39.99+VAT of purchased at a later date.

* Sublimation/toner foil available as an optional extra.
   Details available on request.



Copyright 2007 Creative Printers of London

Click image to enlarge

Currently, we stock foils in the
above seven colours.

Foils are supplied in standard 400 feet
length. We can cut them to any size
in multiples of one complete inches,
with a minimum size of 2" width.

The cost per inch wide x 400 length
is £2.30+VAT. P&P is extra and can
be advised on request.

The Baby DUT
Hot Foil Printing Machine at just £399.00+VAT
Delivered Free of charge to mainland UK

- Probably the lowest priced machine on the market!

The Baby DUT is a compact table-top hot foil printing machine with an automatic foil rewind system.

The Baby DUT is a great machine for a beginner or for someone who has limited budget/usage. It is a light duty machine, with a small print area and it is capable of printing onto a wide range of products and surfaces including paper, card, leather, PVC, plastic etc. This makes it great for printing onto business cards, stationery, photo mounts, promotional products as well as greeting cards and lots more.

The Baby DUT is a vertical type of hot foil press which is great for printing onto books, diaries , Favour Boxes, Place Cards, Small Invites, Pencils, Napkins, Bookmatches, Gift Paper Bags etc.

The Baby DUT uses metal dies which can be made from your black and white artwork. We will give you details of companies who make these (based in UK) and they take about 3-4 days to delivery them to you in a jiffy bag. The cost, for a business card size plate/block is between £9.00+VAT for a thin metal plate to about £15.00+VAT for a thick quarter inch plate. The latter will last longer and not bend so easily.

The die is attached to the machine using a special tape and the heated to the correct temperature. Foil colour of your choice is fed into the machine. When you pull the handle, the hot block presses onto your card, paper, plastic, PVC or leather product and this is what creates the print.

When you get a block made, you can incorporate any font, clipart or design.

Click image to enlarge

We also offer an optional Type Holder with the Baby DUT at a cost of £29.99+VAT when purchased at the same time as the Baby DUT or £39.99+VAT if purchased at a later date.

Type holder is simple device which is designed to hold lines of type (within slip cases). We recommend that it is suitable only for two to three lines of type, not exceeding the width of the type holder. Slip Cases, Type, Quads & Spacers are all optional extras which can be purchased from our recommended suppliers - we do not supply them ourselves.

The Baby DUT is designed mainly to print onto soft substrates such as leather key fobs, coasters, bookmarks etc. It may also be suitable for other substrates and surfaces but with limitations.

The optional type holder is designed to be affixed onto the die holder (supplied) using two screws. In cases where the type holder is purchased at a later date, we will require the die holder to be sent back to us so that we can drill and tap two holes which will enable the type holder to be securely held onto the die holder.

When using the type holder with type, you will need to remove the sliding print bed and use a suitable base (not supplied). The suitable base could be anything as simple as a piece of MDF etc. This is because the height of the type will narrow the gap between the face of the type and the print bed.

Foiling with Toner Pad

Did you know that with the Baby DUT hot foil printing machine, you can also add foils to photo or laser copies (These foils are different compared to standard for hot foil printing but they do give the same effect).

Currently, we are supplying a free toner sublimation pad which will enable you to add foil effects to your photo or laser copies (see image below). This process makes it very ideal for foiling headers of greeting cards etc without using any printing plates or blocks. So, whether it's text or logos and images, you can now foil them without using any plates/blocks!

However, please note, the print area on the Baby DUT is only 60 x 90mm so it is not suitable for larger areas. For printing onto large areas, please look at our DUT-21 DIGITAL Hot Foil Printing machine.

The toner pad is not intended to replace blocks but is useful in instances where your require short run foiling onto paper and card only which may not warrant the cost of the block.

The Baby DUT hot foil printing machine represents true value-for-money. In the 22+ years that I have been in the hot foil printing business, I have never come across a hot foil machine that is so versatile and so competitively priced. The Baby DUT hot foil stamping machine is priced to sell!